TASKI NOBILE PLUS ( 5 kg ) Bucket.

TASKI Nobile Plus
High gloss crystallizer
Taski Nobile Plus a product used for wet crystallization and protection of calcareous stone
floors.
Features and Benefits

Quickly achieves a mirror-like shine thanks to a combined chemical and mechanical action
Reduces water and dirt penetrability, thus facilitating daily cleaning and maintenance.
Increases contour acuity and intensifies the natural appearance of the stone
Significantly improves slip-resistance

Dosages /Dilution :
Make the solution with 3 parts of powder and 1 part of water. Slowly add the water to the powder and shake the
mixture to a homogeneous paste. Please ensure that the paste is shaken vigorously to ensure smooth dispersion. When
the paste has to applied on the surface shake the mixture adequately so that the crystals don’t settle down and are
adequately spread over the floor.

Directions for use
1. If the floor has visible scratches, then hone the surface using 400 grit diamond pad for 2 mins per sqm and followed
by 1800 or 2000 grit diamond pad for 5 mins per sqm before subjecting to the crystallisation.
2. Use 1% neutral cleaner solution and clean the surface using single disc machine with red pad and then vacuum it.
Ensure proper rinsing with water to remove all dirt particles. Prepare paste by taking 3 parts of Nobile Plus and 1 part
of water. Use 40 gm paste per m².
3. Damp the floor using wet mopping. Ensure it is just moist and no excess water on floor. Its extremely important to
have the floor slightly moist before the application of Nobile Plus.
4. Spread the paste in the center of the application area. Place a 175 RPM single disc machine weighing a minimum of
110 pounds (50 kg), fitted with a red pad, directly on top of the paste.
5. Begin spreading the paste equally over the entire area to be treated.
5. Buff for 3-4 mins per m². Do not allow the paste to dry. Sprinkle a little water whenever required to maintain a creamy
paste.
6. At the end of crystallisation, dilute the slurry with fresh water, pick it up with a wet vacuum cleaner. Flood and agitate
the section thoroughly with plenty of neutral cleaner solution to ensure complete product rinse-off. Remove the
solution with a wet vacuum cleaner.
7. After the floor dries completely, dry buff with a single disc machine, 200–1500 rpm, fitted with a soft white pad.

Safe handling and storage information

Store in original closed containers, away from extremes
of temperatures. Full guidance on the handling and
disposal of this product is provided in a separate
Material Safety Data Sheet.

Precautions
For scratched surfaces, grinding is recommended before
the crystallization. Use only on calcareous stone floors, e.g.
marble, travertine. Protect other surfaces from splashes.
Use paste immediately after preparation. Keep container
tightly closed.